BAD LANDS® FEATURES
The Bad Lands® Anti-Pry Tabs are made to stop the bolts from moving past a certain point during a pry attack. During a pry attack the bolts will bend and without any Anti-Pry Tabs will continue to bend until they are broken away from the inner door frame. The Anti-Pry Tabs on a Bad Lands® safe stop the movement of the bolts. When the bolt begins to bend the Anti-Pry Tab attached to the back end of the bolt works will make contact with the door and effectively stop any further movement of the bolts. Effectively stopping a pry attack. Bad Lands® Safes have the Anti-Pry Tabs attached to the bolt works on each end of the interior bolt works. The vertical length of the door is where it is most vulnerable to pry attack and that is where we place the Anti-Pry Tabs on a Bad Lands® safe.
The Bad Lands® Slip Clutch design is another security feature that isn't found on many safes in it's price range. The Slip Clutch essentially slips out of gear when the Handles are being forced in the opposite direction of the main functionality of the safe. Without a Slip Clutch, the handles could be force-ably maneuvered to then break the inner bolt works of the door and allow the bolts that secure the door to fall away or be pushed out of the way to gain access to the safe. With the addition of the Slip Clutch the inner bolt works are safe from this kind of attack. The Slip Clutch effectively "slips" out of gear and make a full rotation to "slip" back into gear, without any damage to the safe taking place. This is another way Dakota Safe Company can offer the most secure safe in it's market with the Bad Lands® line of safes.
Bad Lands® safes utilizes a Re-Locker System in each and every safe. The Re-locker System works by incorporating a plate of hardened steel in front of the lock assembly. This steel plate will chew up a drill bit to help slow down the process of a drill attack on the safe. Once the drill eventually makes it through there is still the matter of the Re-Locker pin. Once drilled the spring loaded pin will engage and lock the bolt works into place. Essentially a secondary lock that engages during a drill attack and thus properly named a Re-Locker System. Bad Lands® safes provide several layers of security into the construction of each door design. This just helps make a Bad Lands® safe one of the most secure safes in its class.
Bad Lands® safes employ a 3 Way Bolt Works system into each size of safe built. We like to refer to these bolt works as "Active". The 3 Way Bolt Works are simply named after how they work. Each side of the door has its own set of bolts that are actively engaged by turning the handles on the front of the safe which engages the inner bolt works that simultaneously turns each mechanism moving the bolts in and out of the door and door frame. The bolts on the hinge side of the door are dead bolts and thus are in active making this door a 3 way active bolt works. The "Active" phrase refers to the fact all the bolts on each side of the door "move". On lower range safes, the hinge side of the door only had dead bolts which are inactive. The 3 Way Active Bolt Works on a Bad Lands® safe is just another level of security that we offer.
Bad Lands® safe use massive 1.25" hardened steel bolts to secure their safes. Many safes use smaller bolts or no bolts at all and instead use flat pieces of metal to keep their door secure. The 1.25" hardened steel bolts on a Bad Lands® safe are make help make the door more secure and pry resistant.
The Bad Lands® safes incorporate up to 12 - 3 way active bolts around the door of the BL42 and no less than 9 on all other safes. Dead bolts are used to secure the hinge side of each Bad Lands® Safe. The thicker the bolts and the more bolts that are used in the construction of the door, the better. Bad Lands® safes prove that the more secure the door the more security you will have for your valuables.
Bad Lands® safes ads functionality to each safe with the addition of external hinges. The Hinges themselves are fully welded to the body and door giving it a better sense of quality. The External Hinges on the Bad Lands® safe allows for a complete 180° degree opening of the door. This allows an ease of access you will not get with a 90° degree open door. The external hinges play no part in the overall security of the safe, just ease of opening.
Black / Chrome
Dakota Safe Company has had its fair share of ups and downs when it comes to the look of our safes. The overall look of the safe needed to be just as appealing as the inner working and security of the safe. We decided to go with Black Hardware and a Chrome Handle/Hub set on all Bad Lands® safes. The Bad Lands® safes feature a five spoke Chrome handle and Black Combination dial. You can't go wrong with a Black Chrome Hardware package on your safe. Dakota Safe Company gives you this luxury look at an affordable price.
The line of Bad Lands® safes feature a Basic Combination Lock in its design. Each Bad Lands® safe comes standard with a mechanical lock. The advantage of having a combination lock over and electronic lock is simple. A mechanical lock will never to have the batteries replaced. An electronic lock can easily replace the mechanical lock with the help of a Lock Smith. The same can be said about changing the combination on your mechanical lock, with the help of a Lock Smith. Each safe will have it's own serial number that will conencide with the combination to each safe. Dakota Safe Company keeps these combinations and serial numbers locked up in a guarded location to use in case, for some reason, the owner of the safe looses the combination. Once the combination has been changed from it's original factory setting or replaced with an electronic lock, the abiliy of Dakota Safe Company to help get into a safe ends.
A commonly overlooked issue with most safes is Shelf Support. Most shelving on Safes is made of particle board covered in a material. The underlying material has a problem of bowing out of shape when kept under constant pressure. Ammunition and guns can be very heavy in combination and bend your shelf over time. Dakota Safe Company installs steel under shelf supports on all their Bad Lands® Safes. The steel support fits on the the existing shelf support system and provides a never wavering amount of strength to the shelf, giving it the added capacity to hold more weight indefinitely. This feature is more important than most would think, but those of you who have had shelves with out this type of support you will know the result all to well. This feature comes standard on all shelves that span the full length of the safe. With this kind of feature your safe will hold more than you would have thought possible before.
The interior on the Bad Lands® safes are what we like to refer to as, Modular. The Modular Interior of our safes means that they are customizable. Each safe will come with adjustable shelving heights. The Gun Storage capacity of your safe can double by utilizing each gun rack for guns. Each safe provides enough shelves to make the racks on the wall side of the safe into three separate shelves. The capacity and use of your shelves are completely up to your and your taste. We just make it possible for you to expand the interior as you see fit.
The exterior of all Bad Lands® safe products have a durable textured powder coat finish that is sure to last the test of time. Powder coating is a type of coating that is applied as a free-flowing, dry powder. Powder coating creates a hard finish that is tougher than conventional paint. The Bad Lands® series feature a rich "Black Silver Vein" powder coat finish. This is the only color available with the Bad Lands® series of safes. If by chance you scratch or gouge your powder coat finish we can provide touch up paint available (at an extra cost). The longevity of your safes exterior will be extended significantly with a powder coat finish as apposed to a regular paint job which is subject to more blemishes and noticable sratching. Enjoy the durability of a powder coat finish on your Bad Lands® safe.
The Bad Lands® series incorporates a Palusol® in-tumescent fire seal, which is a sodium silicate material surrounded in a thermoplastic profile. When exposed to heat Palusol® expands with the development of a fine-porous, compression resistant, non-combustible seal creating a foaming pressure up to 5 times its thickness. This foam then fills joints and gaps preventing the penetration of fire and/or smoke for up to 60 minutes with evaporating water producing an additional cooling effect.
12 gauge body
The security of every gun safe comes down to two things, the door and the steel in the body of the safe. The Bad Lands® Line of safes uses a continuously welded body system made from 12 gauge steel. This thickness of steel has proven time and again to be a durable, secure choice for building a safe at this price point. It is common knowledge that safes can be built from many thicknesses of steel and the thicker the steel the more the price will go up. This will always be the case. Bad Lands® safes provide 12 gauge steel to secure your valuables and protect against theft.
The welds on a Bad Lands® safe is one of the most important features. Most mid range safes use only spot welds and bondo to hold their safes together. You can read and watch many videos showing how easy it is to break open a safe with only a hand sledge. Dakota Safe Company puts particular attention to detail in the construction of the Bad Lands® safes. Each safe features a fully continuous welded body. Each plate of steel welded together with one solid welded bead to join each plate at the seams and effectively make them one solid piece of steel. The proof is in the welds and Bad Lands® safes sport proof of fully continuous welds in every safe they build.
Bad Lands® safes utilize a roll form door design. The words "roll form" says it all. The door on a Bad Lands® safe is one sheet of 12 gauge steel that is bent/rolled into the shape of the door that will contain the interior components of the door. The fire board is contained within the roll form of the door to help maximize space and protection from fire. To add to the rigidity of the door a 12 gauge steel stiffener plate is added to a significant portion of the doors total dimensions. This keeps the door from wobbling and adding extra security and rigidity to the overall design of the door. The security of any gun safe comes down to to a few significant features and the rigidity of the door is paramount. The Bad Lands® safe series accomplishes this task with their roll formed door design.
There are many safes out there that claim to be fire "proof". There is no such thing. The most any safe can do is "Resist" fire as long as it can. Many features on the Bad Lands® line of safes helps do just that. Included in the Bad Lands® safe construction is the inclusion of fire material in the body and a roll form door which contains more fire material along with the inner door panel and a Palusol Heat seal. All of these features combine to give the Bad Lands® an impressive 45 minute at 1250° degree fire rating. Dakota Safe Company tests the fire "Resistance" of the Bad Lands® safes by actually burning up a safe to see what the "FAIL" point is on the safe. This is how we determine the Fire Rating of our safes.read more . . .
Dakota Safe Company will repair or replace, at our discretion, any safe broken into by unlawful forced entry, damaged do to an unlawful break in attempt or damaged in a home fire during the lifetime of the original purchaser. Provided the purchasers home owners insurance fails to cover the safe. Damaged safe must be returned to Dakota Safe Company or its authorized agent for evaluation, freight prepaid along with a full police or fire Marshall report. If claim is found to be valid, we will send a replacement or repaired safe to the customer, freight prepaid. We will repair or replace , at our discretion, any safe damaged in a home fire. Provided the purchasers home owners insurance fails to cover the safe.
read more . . .